Skip to content
USADecorative
Concrete Coatings

Residential

Concrete Designed Around the Way You Live.

A garage, patio or interior floor is part of the house, not just the surface underneath it. Treated properly, concrete becomes a finish worth designing around — for homes across Northern California.

Warm brown stained concrete floor running through a residential interior with a stone feature wall.

Where It Works

Every Slab on the Property.

Different spaces ask for different things. Below is where these systems typically go, and the finishes most often specified for each.

  • Grey and blue flake epoxy floor in a finished residential garage.

    Garage Floors

    The upgrade homeowners notice first — bright, sealed and genuinely easy to sweep and mop.

    Often Specified

    Epoxy Flake Flooring · Polyaspartic Coatings

  • Light grey flake floor under a covered outdoor patio, brick columns framing the open bay.

    Patios

    An outdoor room that reads as part of the house rather than a slab that happens to be attached to it.

    Often Specified

    Grind & Seal · Concrete Staining

  • Textured light-toned concrete pool deck wrapping a rectangular pool behind a house.

    Pool Decks

    Texture underfoot matters most here, alongside a finish that tolerates sun and standing water.

    Often Specified

    Epoxy Quartz Systems · Grind & Seal

  • Red-brown stained concrete driveway running up to the garage of a brick home.

    Driveways

    The largest visible concrete surface on most properties, and usually the most weathered.

    Often Specified

    Grind & Seal · Polyaspartic Coatings

  • Tan scored and stained concrete walkway with a dark border, wrapping the front of a home.

    Walkways

    Paths and entries tie the exterior together. Color and texture do most of the work.

    Often Specified

    Concrete Staining · Grind & Seal

  • Grey polished concrete floor in an interior room, reflecting the doors on the far wall.

    Interior Concrete Floors

    A continuous, seamless floor with no grout lines, no seams and nothing to trap dust.

    Often Specified

    Polished Concrete · Concrete Staining

  • Grey coated concrete floor inside a metal workshop building.

    Workshops

    A surface that takes dropped tools, rolling chests and spills without staining through.

    Often Specified

    Epoxy Flake Flooring · Epoxy Quartz Systems

  • Black and white flake floor running between the machines and folding benches of a laundry facility.

    Utility & Storage Spaces

    Laundry rooms, mudrooms and storage areas — sealed, bright and quick to wipe down.

    Often Specified

    Epoxy Flake Flooring · Grind & Seal

Featured — Garage Floors

The Room You Use Most, Finished Properly.

Most homeowners meet decorative concrete through their garage. It is also where the difference between a coated floor and a prepared one shows up fastest.

Grey and blue flake epoxy floor in a finished residential garage, storage hooks on the wall behind it.
  • Mechanical Preparation

    The slab is opened with diamond tooling rather than acid-etched, which is what allows a coating to bond properly in the first place.

  • Cracks & Spalls Repaired

    Where the slab needs it, damage is cut out and filled before any color goes down, so the finished floor reads as one surface.

  • Decorative Flake Blends

    Flake color, size and density are chosen from samples — it is the part that decides how the finished garage actually looks.

  • Epoxy & Polyaspartic Options

    The build coat and topcoat are specified separately. Polyaspartic topcoats are commonly chosen where fast return to service or sun exposure matter.

  • Easy to Keep Clean

    A seamless, non-porous surface means dust sweeps up and spills wipe off instead of soaking into bare concrete.

  • Everyday Use

    Garages see vehicles, tools and foot traffic. The system is selected around that reality, and we will talk you through what suits yours.

Outdoor Living

Outside, the Rules Change.

An exterior slab deals with sun, rain, temperature swing and bare feet. That rules out some of what works beautifully indoors — a standard interior epoxy is not simply carried outside and expected to behave.

  • Light grey flake floor under a covered outdoor patio, brick columns framing the open bay and seating area.
    Patios & Entertainment Areas
  • Textured light-toned concrete pool deck wrapping a rectangular pool behind a house.
    Pool Decks
  • Tan scored and stained concrete walkway with a dark border, wrapping the front of a home.
    Walkways & Driveways
  • Sun & UV Exposure

    Standard epoxies can amber under direct sun. Exterior work generally relies on UV-stable topcoats or sealed and textured systems instead.

  • Moisture & Drainage

    Exterior slabs move moisture differently than interior ones. Where conditions suggest it, that gets checked before anything is specified.

  • Slip Resistance

    Pool surrounds, patios and walkways usually call for added texture. It is decided before installation, not added afterwards.

  • Temperature Movement

    Outdoor concrete expands and contracts more. Joints and transitions are treated accordingly rather than coated straight over.

Interior Decorative Concrete

An Architectural Finish, Not a Floor Covering.

For homeowners who want something other than tile, timber or carpet, the slab already in the house can become the finish itself — seamless, continuous and unlike anything that arrives in a box.

  • Pewter and charcoal metallic epoxy floor, hand-worked into a marbled pattern across a finished office.

    Metallic Epoxy

    Hand-worked pigments that move like stone and marble. No two floors are ever the same.

  • Polished concrete floor with exposed aggregate reflecting the lights of an open interior.

    Polished Concrete

    Your existing slab refined through progressive diamond passes into a hard, light-reflective finish.

  • Warm brown stained concrete floor running through a furnished living space.

    Concrete Staining

    Translucent colour that penetrates the slab, producing variation that lives in the concrete rather than on it.

  • Warm brown decorative concrete floor reflecting ring lights across an open event space.

    Decorative Concrete

    Custom color, aggregate and finish work for surfaces designed alongside the architecture.

  • Smooth grey concrete floor in a finished kitchen, reflecting the light from the windows.

    Grind & Seal

    A cost-effective, durable finish that opens the surface, then locks it under a protective sealer.

Choose Your Finish

Six Directions, One Slab.

Most homeowners arrive knowing roughly how they want the space to feel rather than which product delivers it. This is the shortest route from one to the other.

  • Close view of a black, white and grey vinyl flake floor sealed under a clear topcoat.

    Flake Systems

    Clean, practical and lightly textured underfoot.

    A seamless chip-broadcast surface that hides imperfections, shrugs off chemicals, and cleans with a mop.

  • Pewter and charcoal metallic epoxy floor, hand-worked into a marbled pattern across a finished office.

    Metallic Epoxy

    Artistic movement, and no two floors alike.

    Hand-worked pigments that move like stone and marble. No two floors are ever the same.

  • Polished concrete floor with exposed aggregate reflecting the lights of an open interior.

    Polished Concrete

    Refined, exposed concrete with a mechanical sheen.

    Your existing slab refined through progressive diamond passes into a hard, light-reflective finish.

  • Warm brown stained concrete floor running through a furnished living space.

    Concrete Stain

    Color that sits inside the slab rather than on top of it.

    Translucent colour that penetrates the slab, producing variation that lives in the concrete rather than on it.

  • Pale quartz-broadcast walkway running between clipped hedging alongside a house.

    Quartz Systems

    Dense and textured, for the hardest-working rooms.

    Colored quartz set in resin for a dense, slip-resistant surface built for wet and high-traffic areas.

  • Smooth grey concrete floor in a finished kitchen, reflecting the light from the windows.

    Sealed / Grind & Seal

    Natural concrete character under a protective sealer.

    A cost-effective, durable finish that opens the surface, then locks it under a protective sealer.

Before & After

Same Slab, Different House.

Almost every garage and patio we finish started out stained, cracked or simply tired. The progression below is the one every residential project follows.

  1. Untreated Concrete

    Staining, cracking, spalling, dusting or a failed previous coating — the honest starting point.

  2. Surface Preparation

    Mechanical grinding, repair and cleaning. The stage that decides everything that follows.

  3. Finished Surface

    The specified system installed, topcoated and detailed to the edges.

The same two-car garage after installation, finished in a grey flake floor.
Bare, stained concrete slab in a two-car garage before treatment.
BeforeAfter

Drag to compare — the same garage, before and after

Why Preparation Matters

The Finish Starts Underneath.

A coating can only be as sound as the concrete it sits on. If you have seen a garage floor peel in sheets, this is the stage that was skipped.

  1. Surface Evaluation

    The existing concrete is assessed for cracking, previous coatings, moisture and profile so the right system can be specified.

  2. Mechanical Diamond Grinding

    Every slab is opened with diamond tooling, not acid-etched. It is the step that decides whether a coating bonds for a decade or lifts in a season.

  3. Crack & Surface Repair

    Cracks, spalls and pitting are cut out and filled before any color goes down, so the finished floor reads as one continuous surface.

  4. Full Surface Preparation

    Profiling, vacuuming and cleaning are handled as their own stage of the job, because a coating can only be as sound as the surface beneath it.

  5. Moisture Mitigation When Required

    Slabs are tested where conditions call for it. When vapor is present, a mitigation layer is installed rather than coated over and hoped for.

  6. Correct Surface Profile

    Grinding is taken to the profile the specified system needs — coarse enough to bond, consistent enough to finish evenly across the whole floor.

  7. Edges & Transitions

    Perimeters, door thresholds, control joints and corners are cut in by hand. It is slower, and it is the difference between a coated floor and a finished one.

How It Goes

Five Steps, Start to Finish.

  1. Tell Us About Your Space

    Where the concrete is, how you use it, and the sort of finish you have in mind.

  2. Review the Existing Concrete

    We look at the slab as it stands — cracking, staining, previous coatings and moisture.

  3. Select the Right System & Finish

    Colors and flake blends are chosen from samples, and the system is matched to the room.

  4. Prepare the Surface

    Diamond grinding, repairs and cleaning. The stage that decides how long the finish lasts.

  5. Install the Finish

    Coats go down in sequence with cure times respected, then we walk it with you.

Residential Work

Finishes for the Home.

View All Projects
  • Grey and blue flake epoxy floor in a finished residential garage, walls and storage hooks visible behind it.

    Garage Flake System

    Garage Floors

  • Pearl and bronze metallic epoxy floor with hand-worked veining, poured wall to wall in an interior room.

    Metallic Epoxy Floor

    Metallic Epoxy

  • Grey polished concrete floor in an interior room, reflecting the doors on the far wall.

    Interior Polished Concrete

    Polished Concrete

  • Warm brown stained concrete floor in a residential interior with a stone feature wall.

    Residential Stained Concrete

    Concrete Stain

  • Red-brown stained concrete driveway running up to the garage of a brick home.

    Stained Concrete Driveway

    Exterior Concrete

  • Light grey flake floor under a covered outdoor patio, brick columns framing the open bay.

    Covered Patio Concrete Finish

    Decorative Concrete

Service Territory

Working Across Northern California.

We evaluate residential, commercial and contractor projects throughout the Northern California territory — from the Sacramento valley through the foothills and north toward Chico. If your project sits near the edge of that map, ask us anyway.

Regularly Serving

Sacramento · Roseville · Rocklin · Folsom · Elk Grove · Auburn · Lincoln · Chico · Grass Valley · Nevada City and surrounding communities.

Charcoal stained and sealed exterior concrete slab running alongside a metal building.

Ready to Transform Your Concrete?

Tell us about the space, how it gets used, and what you want it to look like. We will walk the concrete, explain what it needs, and put a clear estimate in writing.